Specialized Turbo error codes
All 20 Specialized Turbo codes we have documented: what each one means, what stops working and what you can do yourself before going to a dealer. Applies to Levo, Kenevo, Vado, Creo, Como; TCU, TCD-w, MasterMind TCU/TCD.
Text messages on TCD-w and MasterMind TCD/TCU displays, colour-coded frames on MasterMind H3/T3 (red error, yellow warning, blue info, green notification), and LED bar patterns on the TCU (a red top bar plus one or more blue bars). The Specialized app shows a suggested action for live errors; retailers read the full event log.
Get Specialized news & firmware updates in Telegram| Code | Meaning | What to do |
|---|---|---|
| MOTOR ERROR | Fault reported by the motor (TCD-w, MasterMind TCD/TCU, H3/T3). Not always a broken motor: a missing speed sensor magnet also triggers it. | Restart the bike and check the Specialized app, which shows a suggested action for live errors. If it persists, see a Specialized retailer (they can read the event log). |
| MOTOR NOT FOUND | The display can't talk to the motor, usually a connection problem. | Usually a lost connection: restart, then check plugs and cables for damage or looseness. If it persists, see a Specialized retailer. |
| BATT ERROR / BATTERY ERROR | Fault reported by the main battery. | Restart the bike and check the Specialized app, which shows a suggested action for live errors. If it persists, see a Specialized retailer (they can read the event log). |
| BATT NOT FOUND / BATTERY NOT FOUND | The display can't talk to the battery, usually a connection problem. | Usually a lost connection: restart, then check plugs and cables for damage or looseness. If it persists, see a Specialized retailer. |
| LOW BAT / LO BAT (TCD-w) | The CR1220 coin cell inside the TCD-w display is running low. The bike still works; only the clock setting is no longer kept. | Replace the CR1220 coin cell in the display. |
| TCU: red top bar + blue 3rd bar | Motor error shown on the top-tube TCU LEDs. | Restart the bike and check the Specialized app, which shows a suggested action for live errors. If it persists, see a Specialized retailer (they can read the event log). |
| TCU: red top bar + blue 5th bar | Battery error on the TCU. | Restart the bike and check the Specialized app, which shows a suggested action for live errors. If it persists, see a Specialized retailer (they can read the event log). |
| TCU: red top bar + blue 3rd and 5th bars | Battery and motor error at the same time. | Restart once; if it persists, contact a Specialized retailer. |
| TCU: red top bar + blue 6th bar | Range Extender battery error. | Check the Range Extender plug is pushed fully into the charge port and locked, and that there is no water in the plug. If it persists, see a retailer. |
| TCU: red top bar + blue 2nd bar | Motor not found (TCU). | Usually a lost connection: restart, then check plugs and cables for damage or looseness. If it persists, see a Specialized retailer. |
| TCU: red top bar + blue 4th bar | Battery not found (TCU). | Usually a lost connection: restart, then check plugs and cables for damage or looseness. If it persists, see a Specialized retailer. |
| TCU: red top bar + blue 7th bar | Firmware update error. | Start the update again in the Specialized app. |
| TCU: red top bar + blue 8th bar | The TCU coin cell battery is low or empty. | Replace the coin cell in the TCU. |
| TCU: three spinning segments | Not a fault: the bike is still in factory state with assist limited to 15 km/h. | The retailer has to update the firmware and set the country speed limit before handover. |
| MasterMind H3/T3: red frame | Error message on MasterMind H3/T3 (red = error, yellow = warning, blue = info, green = notification). "Check App" means the app has the suggested action. | Restart the bike and check the Specialized app, which shows a suggested action for live errors. If it persists, see a Specialized retailer (they can read the event log). |
| Battery LEDs flash red + beeping | Cell imbalance in the battery (3 to 5 LEDs flash red at switch-on, continuous beep). | Don't charge a battery that is damaged or shows an internal error. If possible run it below 30%, store it outside the home in a safe place, and have a retailer check it with Specialized's battery diagnostic software. Call the fire service if it is hot, smoking or swelling. |
| NO MOTOR / NO BATTERY (MasterMind) | MasterMind display can't find the motor or battery, usually a lost connection. | Restart, then check plugs and cables for damage or looseness. If it persists, see a Specialized retailer. |
| RADAR ERROR (MasterMind) | Error from connected radar device. | Reboot; Mission Control; retailer. |
| GEAR SHIFTER ERROR (MasterMind) | Error from the gear shifter component. | Reboot; Mission Control; retailer. |
| TAMPER ERROR (MasterMind) | Tamper error message shown by the system. | Contact retailer. |
- 'Not found'/'No xy' messages are usually loose or damaged connectors/cables; 'error' messages need further investigation and possibly parts.
- Many TCU2/MasterMind errors can be cleared with a remote button press; restart if it persists - the bike stays rideable without assist.
- Use Mission Control's diagnostic report so the retailer can read the event log.
Written in our own words from the manufacturer’s documentation. Codes can change with firmware; your dealer’s diagnostic software has the final word. Sources: support.specialized.com · content.specialized.com
FAQ
What does Specialized MOTOR mean?
Fault reported by the motor (TCD-w, MasterMind TCD/TCU, H3/T3). Not always a broken motor: a missing speed sensor magnet also triggers it. What to do: Restart the bike and check the Specialized app, which shows a suggested action for live errors. If it persists, see a Specialized retailer (they can read the event log).
What does Specialized TCU: mean?
Firmware update error. What to do: Start the update again in the Specialized app.
How do I avoid Specialized error codes?
'Not found'/'No xy' messages are usually loose or damaged connectors/cables; 'error' messages need further investigation and possibly parts. Many TCU2/MasterMind errors can be cleared with a remote button press; restart if it persists - the bike stays rideable without assist. Use Mission Control's diagnostic report so the retailer can read the event log.
Motors: Specialized Turbo motors. Specialized firmware updates. Other systems: Bosch Smart System, Bosch classic (Gen 2 to 4), Shimano STEPS / EP, DJI Avinox, TQ HPR, Fazua Ride 60, Yamaha PW, Giant SyncDrive.